Beautiful Cornices
·   Light Weight     ·   No Sewing     ·   Fun to Create
·   Easy to Install     ·   Professional Looking


Tudor Outside Mount Cornice Kit FAQs


Since there is no need to glue or staple the fabric to the cornice, you are able to change the color/pattern of the fabric as often as you change the decor in your home - it's like having a whole new cornice!

Please to see how easy it really is.

Light weight, expanded polystyrene (Styrofoam) sections are simply glued together with a full regular low temperature glue gun (200 - 250 degrees Fahrenheit) to create your special cornice for any size window or door.

We do not recommend using a mini glue gun because you will not be able to apply enough glue quick enough to achieve a good bond.

Check our , , and for your cornice project, or other projects.

How do I determine what height (drop) to order?

Instead of three contoured surfaces, as is on the Avalon cornice face, our Tudor Cornice Kits have a flat front surface for a plain, but elegant look.

The Tudor Cornice is offered in 12"/9"/12" and 15"/12"/15" drop (height) in any width that you need (up to 50’).
  • The 12"/9"/12" Tudor Cornice looks great on small bathroom & kitchen windows, in children’s rooms, and on standard size windows and over sliding glass doors. The 12"/9"/12" Tudor Cornice is a 12" drop on each end, and transitions to a 9" drop in the center sections(s).
  • The 15"/12"/15" Tudor Cornice looks wonderful on very wide windows or in rooms with very tall ceilings. The 15"/12"/15" Tudor Cornice is a 15" drop on each end, and transitions to a 12" drop in the center sections(s).
Here's an easy way to determine what height works best for you using a regular 8 ½ X 11 sheet of paper.
  • Have someone hold the paper lengthwise so that the longest side of the paper runs the length of your opening. They'll probably need to use a step stool or ladder to hold the paper in the approximate location where the finished cornice would go. From across the room, you would observe how it looks. This simulates our 12"/9"/12" drop cornice.
  • Next have them rotate the paper so that it's up and down like you would normally use it. This simulates our 15"/12"/15" drop cornice. If this looks just right, you'll want to order our 15"/12"/15" cornice kit.
How do I determine what length to order?

To determine what length Tudor Cornice to order, measure the inside of your opening and add 1-4" on each side - this is called the overlap.


But, if your opening has moulding around it, measure the outside of the moulding on the left side of your opening to the outside of the moulding on the right side of the opening and add 1".

But, if you have a curtain rod or vertical blind rail that your cornice will be covering, measure the length of the rail and add 1".

Pick the longest measurement from above that applies to your opening, and this will be the inside measurement of your Tudor cornice.

The outside length of your Tudor Cornice is the inside measurement PLUS the thickness of the 2 end caps. Since each Tudor end cap is approximately 2" thick in the center, the outside length is approximately the inside measurement PLUS 4".

What is a Starter Kit?

Our Outside Mount Cornice Kits
for 33" to 48" openings contain:
  • 2-transition sections
  • 1- 16" section
  • 2- end caps
  • 1- tuck tool
  • 2- 5" brackets (12"/9"/12" drop), or
    3- 5" brackets (15"/12"/15" drop)
  • screws and anchors
  • set of complete, easy to read instructions
This is our Starter Kit.

What if I need a longer cornice than the 33" - 48" opening Starter Kit?

If your opening is wider than 48", then you would order the following to achieve your desired length:
  • 1 Tudor Starter Kit,
  • enough 2-Piece Extension Kits (32" long), and/or
  • 1 1-Piece Extension Kit (16" long).
Please use the following chart to help you to determine what to order for your cornice:

Opening SizeWhat You Would Receive
14"-32" openings Only purchase Tudor Cornice Kit for 14"-32" openings.
33"-48" openings Only purchase 1 Tudor Starter Kit.
49"-64" openings Purchase 1 Tudor Starter Kit, and
1 1-Piece Extension Kit.
65"-80" openings Purchase 1 Tudor Starter Kit, and
1 2-Piece Extension Kit.
81"-96" openings Purchase 1 Tudor Starter Kit,
1 2-Piece Extension Kit, and
1 1-Piece Extension Kit.
97"-19" openings Purchase 1 Tudor Starter Kit, and
2 2-Piece Extension Kits.
113"-128" openings Purchase 1 Tudor Starter Kit,
2 2-Piece Extension Kits, and
1 1-Piece Extension Kit.
129"-144" openings Purchase 1 Tudor Starter Kit, and
3 2-Piece Extension Kits.
145"-160" openings Purchase 1 Tudor Starter Kit,
3 2-Piece Extension Kits, and
1 1-Piece Extension Kit.
161"-176" openings Purchase 1 Tudor Starter Kit, and
4 2-Piece Extension Kits.
177"-192" openings Purchase 1 Tudor Starter Kit,
4 2-Piece Extension Kits, and
1 1-Piece Extension Kit.
193"-208" openings Purchase 1 Tudor Starter Kit, and
5 2-Piece Extension Kits.
209"-224" openings Purchase 1 Tudor Starter Kit,
5 2-Piece Extension Kits, and
1 1-Piece Extension Kit.
225"-240" openings Purchase 1 Tudor Starter Kit, and
6 2-Piece Extension Kits.




Can the cornice be cut specifically for my opening?

As explained above, the sections that are glued together are 16" in length. Most times the length of the opening plus the overlap on each end results in a desired length that is not a multiple of 16", requiring one of the pieces to be cut to the appropriate length. The process that you would use to cut one of the cornice pieces is to:
  • Cut the pieces with something like a drywall saw, a hack saw, an electric knife, or a utility knife.
  • Regardless of how careful you are, the cut will not be smooth, flat, and straight, which is needed in order to have a good bond when glued.
  • After the piece is cut, stand the piece that you will be using upright on the smooth end, so that the rough end is facing upward.
  • Cover the rough end with aluminium foil.
  • Using your heated electric iron, pat the aluminium foil to melt the styrofoam flat, smooth, and straight.
While this is a fairly simple process, you may not wish to try this on your own, so why not let us cut your cornice kits to length for you for only $2.00 per cornice!



How are the cornices attached to the wall?

5" brackets and corresponding End Caps are provided with our kits. This means that there is 5" of clearance between the wall and the back of the cornice.

You may wish to substitute 3" brackets for the standard 5" brackets to move your cornice closer to the wall, providing a 3" clearance. If you would like to replace your Standard 5" Brackets and End Caps with 3" Brackets and End Caps, the charge is an additional $3.00 for each cornice.

Select 5" Brackets or 3" Brackets when adding your item to the shopping cart.



While our 3" or 5" brackets will be perfect most of the time, occasionally you may need custom made brackets for your application. We have made custom brackets as short as ⅛" and as long a 10". We will make them for you using the standard 5" brackets that are provided with your kits; this price includes removing styrofoam from the end caps if shorter than 5", or providing extension pieces that you will glue onto the end caps to accommodate brackets that are longer than 5". If you would like to substitute your Standard 5" Brackets and End Caps for custom brackets and End Caps, the charge for each bracket is $5.00.



The price for extra Custom Brackets is $8.45 per bracket.



What if I have a Bay Window?



Installing individual cornices on each window on a bay window results in an unprofessional looking project.

Installing a continuous cornice on all of the windows in a bay could be very tricky because of cutting the Styrofoam angles to match each angle in the bay.

Our Bay Window Adapters are unique; this is the only easy solution to that tricky bay window dilemma. Our Bay Window Adapters make it super easy to accommodate those tough to measure angles.

You will use Cosmopolitan Bay Window Adapters for your Turdor Cornice. For the 12" / 9" / 12" Tudor Cornice, use the 9" Drop Cosmopolitan Bay Window Adapter. For the 15" / 12" / 15" Tudoe cornice, use the 12" Drop Cosmopolitan Bay Window Adapter.



What if I have a Corner Window?



Installing individual cornices on each window on a corner window results in an unprofessional looking project.

Installing a continuous cornice on both of the windows in a corner could be very tricky because of cutting the Styrofoam angles to match the angle in the corner.

Our Corner Window Adapters are unique; this is the only easy solution to that tricky corner window dilemma. Our Corner Window Adapters make it super easy to accommodate those tough 90° angles.

You will use Cosmopolitan Corner Window Adapters for your Turdor Cornice. For the 12" / 9" / 12" Tudor Cornice, use the 9" Drop Cosmopolitan Corner Window Adapter. For the 15" / 12" / 15" Tudoe cornice, use the 12" Drop Cosmopolitan Corner Window Adapter.



What if I have just need some End Caps?

Some customers save their scrap pieces and unused pieces from previous cornice projects, and just need to order End Caps.



 
qrcode

Web Safety

BOSS

2023
 

Copyright (c) 2009-2024 by the Cornice Store.
wwwcornicestore.comsales@cornicestore.comSun City West, AZ 85375623-556-5713